Chapter 12 . Running Yellow Dog Linux 369 (Web hosting service)
Chapter 12 . Running Yellow Dog Linux 369 Most notably missing from Yellow Dog Linux 4.0 and 4.0.1 supported hardware is Old World ROM or beige G3 and below hardware such as 8500s, 7200s, and Performa PowerPCs. YDL 3.0.1 supports this hardware and most of the hardware currently supported by Yellow Dog Linux 4.0.1. The hardware supported and tested for Yellow Dog Linux 3.0.1 includes: . Power Mac 4400 9600 . Power Mac beige G3 models and blue-and-white G3 models . Most hardware supported by Yellow Dog Linux 4.0 or 4.0.1 If you have older hardware that isn t officially supported, you should still be able to use Yellow Dog Linux 4.0.1, but you ll be running in an unsupported configuration, so caveat emptor. Terra Soft Solutions dropped support for many older hardware configuration so it could focus on the most likely configurations. Also, trying to support outdated computer architectures, of which the Old World ROM systems were particularly troublesome, doesn t offer much return for a commercial Linux venture. Planning Your Installation Before starting installation, back up any data you want to retain on external media (CD, hard drive, and so on). This is a precautionary measure in case your system overwrites data that is important to you. The next step is to determine whether you are going to multiboot Mac OS with Yellow Dog Linux or install Yellow Dog Linux as a standalone product. If you choose to multiboot, you must decide whether you will use two hard drives or partition (or logically divide) a single hard drive to house both Linux and Mac OS. Installing Mac OS X and Yellow Dog Linux on One Hard Drive If you choose to use one hard drive to house both Mac OS and Yellow Dog Linux, you need to load Mac OS (X or 9) first and then create a partition for Yellow Dog Linux as the first partition. In Mac OS X do the following: 1. Boot off the Mac OS X CD by holding down the C key with the Mac OS X CD-ROM inserted. 2. From the Install menu, select Open Disk Utility. 3. Select your hard drive and then click the partition tab on the right side. 4. Choose how many partitions you want. (Two partitions is a good selection if you are installing Mac OS X and Yellow Dog Linux, or if you want to install Mac OS 9 or below and Mac OS X, you can choose the number of partitions needed.) 5. Choose the first gray partition that is untitled (it should be the top one).
In case you need affordable webhost to host your website, our recommendation is ecommerce web host services.