Zeus web server - Chapter 6 . Securing Linux 221 # ping
Chapter 6 . Securing Linux 221 # ping www.example.com PING www.example.com (192.0.34.166) from 10.0.0.11: 56(84) bytes of data 64 bytes from 192.0.34.166: icmp_seq=1 ttl=49 time=40.1 ms 64 bytes from 192.0.34.166: icmp_seq=2 ttl=49 time=42.5 ms 64 bytes from 192.0.34.166: icmp_seq=3 ttl=49 time=39.5 ms 64 bytes from 192.0.34.166: icmp_seq=4 ttl=49 time=38.4 ms 64 bytes from 192.0.34.166: icmp_seq=5 ttl=49 time=39.0 ms — www.example.com ping statistics — 5 packets transmitted, 5 received, 0% loss, time 4035ms rtt min/avg/max/mdev = 38.472/39.971/42.584/1.432 ms In the preceding example, the average time for a ping packet to make the roundtrip was about 39 thousandths of a second. A ping to a nearly saturated link looks like the following: # ping www.example.com PING www.example.com (192.0.34.166): from 10.0.0.11: 56(84)bytes of data 64 bytes from 192.0.34.166: icmp_seq=1 ttl=62 time=1252 ms 64 bytes from 192.0.34.166: icmp_seq=2 ttl=62 time=1218 ms 64 bytes from 192.0.34.166: icmp_seq=3 ttl=62 time=1290 ms 64 bytes from 192.0.34.166: icmp_seq=4 ttl=62 time=1288 ms 64 bytes from 192.0.34.166: icmp_seq=5 ttl=62 time=1241 ms — www.example.com ping statistics — 5 packets transmitted, 5 received, 0% loss, time 5032ms rtt min/avg/max/mdev = 1218.059/1258.384/1290.861/28.000 ms In this example, a ping packet took, on average, 1.3 seconds to make the roundtrip. From the first example to the second example, latency increased by a factor of 31! A data link that goes from working normally to slowing down by a factor of 31 is a clear sign that link utilization should be investigated. For a more accurate measure of data throughput, a tool such as ttcp can be used. To test your connection with ttcp you must have installed the ttcp package on machines inside and outside of your network. (The ttcp package is available with Fedora Core and other Linux systems.) If you are not sure whether the package is installed, simply type ttcp at a command prompt. You should see something like the following: # ttcp Usage: ttcp -t [-options] host [ < in ] ttcp -r [-options > out] Common options: -l ## length of bufs read from or written to network (default 8192) -u use UDP instead of TCP -p ## port number to send to or listen at (default 5001) -s -t: source a pattern to network -r: sink (discard) all data from network -A align the start of buffers to this modulus (default 16384) -O start buffers at this offset from the modulus (default 0)
Visit our web design programs services for an affordable and reliable webhost to suit all your needs.